Thursday, November 28, 2019

Psychedelic Veil: Specimen #72 Vinyl Figure by Jermaine Rogers – A Designer Con 2019 Exclusive!

Designer Con 2019 Exclusive Psychedelic Veil Specimen #72 Vinyl Figure by Jermaine Rogers

Jermaine Rogers surprised his fans at Designer Con 2019 with an ultra-limited new colorway of his Veil: Specimen #72 vinyl figure – the Psychedelic Veil! Check out the insane tie-dyed paint job on this figure. The rumor is that because of the nature of this paint application no two figures are the same. That makes each figure one of a kind! The Designer Con 2019 Exclusive Psychedelic Veil stands 11” tall, is limited to just 10 pieces, and retailed for $200. As you can imagine, this unannounced limited edition exclusive sold out immediately upon release. Big thanks to fellow JR collector Karl Eicher for the photos of his Psychedelic Veil! What a great addition to the collection.
Pin It! - Pin A Picture From TheBlotSays.com

Tygrr Green Variant Janky Vinyl Figure by Pete Fowler x Superplastic

Tygrr Green Variant Janky Vinyl Figure by Pete Fowler x Superplastic

While we don’t know much about the release yet, Superplastic has unveiled it will be releasing this ultra-limited green colorway of Pete Fowler’s Tygrr 3” Janky on Friday. This colorway was not included in Janky Series Two, so the only way you can add it to your collection is by visiting Superplastic.co on Black Friday, November 29th, and purchasing it!
Pin It! - Pin A Picture From TheBlotSays.com

Wednesday, November 27, 2019

Pan’s Labyrinth Screen Print by Matt Taylor x Spoke Art

Pan’s Labyrinth Screen Print by Matt Taylor x Spoke Art

Last Friday, Spoke Art held screenings of Guillermo del Toro’s epic film, Pan’s Labyrinth, in both New York and San Francisco. To commemorate the screenings, Spoke Art commissioned artist Matt Taylor to create a special movie poster for the film. As Matt explained, “I thought there were probably enough posters of The Faun, so instead I focused on Ofelia stepping into the underland.” What a beautiful take on such a haunting film.

Pan’s Labyrinth by Matt Taylor is 24”x36” hand numbered screen print. Limited to just 200 pieces, a small amount of movie posters left over from the screenings are available now at Spoke-Art.com for $60.
Pin It! - Pin A Picture From TheBlotSays.com

Gorillaz 2D Vinyl Art Figure by Superplastic

Gorillaz 2D Vinyl Art Figure by Superplastic

Superplastic recently announced it is teaming up with British band / virtual act, Gorillaz, to release a brand new vinyl art figure of the band’s lead singer, 2D! This announcement seriously blew The Blot’s mind! I love when news like this comes out of nowhere. The collaboration is the first Gorillaz toy of its kind in over ten years since Gorillaz co-creator Jamie Hewlett first worked with Superplastic founder Budnitz on the iconic vinyl Gorillaz toys back in 2005.

Gorillaz 2D Vinyl Art Figure by Superplastic

Superplastic founder Paul Budnitz said, “Gorillaz is a massive inspiration, and I’m incredibly thrilled to be working with Jamie on toys again.” Based on artist Jamie Hewlett’s iconic Gorillaz frontman 2D, this giant 12” toy features two-tone shoes, fat mic, and battery-powered glowing LED eyes. Yes, it has real glowing eyes! Superplastic is sparing no expense in the production of their first – but hopefully not last – Gorillaz figure.

The Gorillaz 2D Vinyl Art Figure by Superplastic is 12” tall, made of soft vinyl, and comes in a beautiful collector’s box. It even includes a battery! Fans can order this awesome new figure now at Superplastic.co for $80.
Pin It! - Pin A Picture From TheBlotSays.com

Knives Out Movie Poster Screen Print by Phantom City Creative x Mondo

Knives Out Movie Poster Screen Print by Phantom City Creative x Mondo

Later today, Mondo will be releasing this old school movie poster for Rian Johnson’s Knives Out by Phantom City Creative! As Mondo explained, “The film tells a beautifully orchestrated mystery tale filled with amazing characters and performances, anchored by Daniel Craig as our favorite new cinematic detective, Benoit Blanc. Seriously, we need everyone to go see this movie. Not only is it brilliantly told and incredibly funny, but we selfishly just want to see a dozen more movies featuring Craig as Benoit Blanc. The film proudly wears its influences on its sleeve, and for our poster, Phantom City Creative take the murder mystery concept and run with it, designing the poster in the vein of a classic detective/murder mystery paperback novel in the vein of the great Agatha Christie.”

Knives Out by Phantom City Creative is a 24”x36” hand numbered screen print. Limited to just 250 pieces, this officially licensed movie poster will go on sale at noon CST today, Wednesday, November 27th, at MondoTees.com for $50.
Pin It! - Pin A Picture From TheBlotSays.com

Tuesday, November 26, 2019

Black Friday Exclusive Grimmy Translucent Purple Edition Resin Figure by Nicky Davis

Black Friday Exclusive Grimmy Translucent Purple Edition Resin Figure by Nicky Davis

Houston’s own Nicky Davis has a very special Black Friday release planned – a new colorway of his Grimmy resin figure! This awesome 3” grim reaper has been cast in translucent purple, which really shows off Nicky’s signature art style. It is limited to just 50 pieces and will go on sale at Midnight on Friday, November 29th, at NickyDavis.com/Shop.
Pin It! - Pin A Picture From TheBlotSays.com

Deadpool “Merc for Hire” Animated Marvel Mini Statue by Skottie Young x Gentle Giant x Diamond Select Toys

Deadpool “Merc for Hire” Animated Marvel Mini Statue by Skottie Young x Gentle Giant x Diamond Select Toys

Deadpool has never looked cuter than in this new “Merc for Hire” Animated Marvel Statue from Gentle Giant and Diamond Select Toys! Based on Skottie Young’s cover to Deadpool and the Mercs for Money #1, Deadpool runs a stand selling mercs (and lots of weapons) in this limited-edition diorama. This adorable animated style statue stands 8” tall, and comes packaged in a full-color box with a certificate of authenticity. Collectors can pre-order the Deadpool “Merc for Hire” Animated Marvel Statue now at Entertainment Earth for $114.99 here.

Deadpool “Merc for Hire” Animated Marvel Mini Statue by Skottie Young x Gentle Giant x Diamond Select Toys
Pin It! - Pin A Picture From TheBlotSays.com

Tenacious Toys Exclusive Cornelius Giant Shark Edition Vinyl Figures by Alex Pardee

Tenacious Toys Exclusive Cornelius Giant Shark Edition Vinyl Figures by Alex Pardee x 3DRetro

Tenacious Toys is teaming up with legendary artist Alex Pardee to release a retailer exclusive colorway of his awesome new Cornelius vinyl figure! This blue colorway is the Giant Shark Edition and it is limited to just 150 pieces. The Giant Shark Cornelius will go on sale at 1pm EST on Friday, November 29th, at TenaciousToys.com for $65.

Tenacious Toys Exclusive Cornelius Giant Shark Edition Vinyl Figures by Alex Pardee x 3DRetro

Cornelius, the henchman of the Candemons, is the Halloween candy you hate that hates you back! This is the seventh classic candy-coated vinyl collectible demon to crawl from your candy bowl. Produced by 3DRetro and sculpted by Greg Aronowitz, Cornelius stands 7” tall, sports that trademark Brightmares grin, and comes packaged in a full color window box.
Pin It! - Pin A Picture From TheBlotSays.com

Gloomy in White SuperJanky 8” Vinyl Figure by Mori Chack x Superplastic

Gloomy in White SuperJanky 8” Vinyl Figure by Mori Chack x Superplastic

Superplastic has released the fourth colorway of Japanese street artist Mori Chack’s awesome Gloomy SuperJanky vinyl figure, and this edition is only available at your favorite designer art toy stores around the globe! Gloomy was rescued by a boy named Pity, who loved and nursed the lil’ guy back to health… until Gloomy went nuclear and strangled him to death. Dragging his caretaker/victim behind him, the Gloomy in White SuperJanky comes with a muzzle – for your own protection! The Gloomy in White SuperJanky by Mori Chack stands 8” tall and will retail for $74.99.
Pin It! - Pin A Picture From TheBlotSays.com

Monday, November 25, 2019

Elektra Animated Marvel Mini Statue by Skottie Young x Gentle Giant x Diamond Select Toys

Elektra Animated Marvel Mini Statue by Skottie Young x Gentle Giant x Diamond Select Toys

The new Elektra Animated Marvel Mini Statue by Gentle Giant and Diamond Select Toys captures Marvel’s pre-eminent assassin in a moment of joyous celebration, sais raised above her head. This 5” statue depicts Elektra Natchios in Skottie Young’s super-cute style seen on numerous variant covers of Marvel comic books. Cast in resin and limited to 1,200 pieces, this adorable statue comes packaged in a full-color box with a numbered certificate of authenticity. Collectors can pre-order the Animated Marvel Elektra Statue now at Entertainment Earth for $34.99 here.
Pin It! - Pin A Picture From TheBlotSays.com

Masters of the Universe Mer-Man 1/6 Scale Figure by Mondo

Masters of the Universe Mer-Man 1/6 Scale Figure by Mondo

The next figure in Mondo’s epic Masters of the Universe 1/6 Scale Collectible Figure Line is the evil Mer-Man! The Blot got to see this amazingly detailed figure in person at MondoCon 5 earlier this year and was blown away. Featuring over 30 points of articulation, fish-eyes, sea-powered armor, and a lot of accessories, this is the most powerfully fishy figure you will ever find, from here to Eternia's oceans!

Masters of the Universe Mer-Man 1/6 Scale Figure by Mondo

The Masters of the Universe Mer-Man 1/6 Scale Figure by Mondo includes two interchangeable heads, the Mer-Sword, a Trident, Hand Blaster V2, 5 pairs of Interchangeable hands, 2 pairs of interchangeable feet, and a figure stand. This 12” figure can be pre-ordered now at Entertainment Earth for $169.99 (with free shipping) here.

Masters of the Universe Mer-Man 1/6 Scale Figure by Mondo
Pin It! - Pin A Picture From TheBlotSays.com

The Mandalorian Legends in 3D ½ Scale Star Wars Resin Bust by Diamond Select Toys

The Mandalorian Legends in 3D ½ Scale Star Wars Resin Bust by Diamond Select Toys

Diamond Select Toys is transporting its amazing Legends in 3D ½ Scale Resin Busts to a galaxy far, far away! That’s because DST has just launched a new line of Star Wars Legends in 3D Resin Busts with the star of the most hotly anticipated TV show of possibly ever, The Mandalorian! This half-scale resin bust measures approximately 10” tall and features detailed sculpting and paint applications. Limited to only 1,000 pieces, it comes packaged with a numbered certificate of authenticity. Collectors can pre-order The Mandalorian Legends in 3D ½ Scale Star Wars Resin Bust by Diamond Select Toys now at Entertainment Earth for $139.99 (plus free shipping) here.

The Mandalorian Legends in 3D ½ Scale Star Wars Resin Bust by Diamond Select Toys
Pin It! - Pin A Picture From TheBlotSays.com

Captain America Wood Deco Variant Pop! Marvel Vinyl Figure by Funko – An Entertainment Earth Exclusive!

Entertainment Earth Exclusive Captain America Wood Deco Variant Pop! Marvel Vinyl Figure by Funko

Entertainment Earth has teamed up with Funko once again to release an exciting new retailer exclusive Pop! figure. Check out this super cool Entertainment Earth Exclusive Captain America Wood Deco Variant Pop! Marvel Vinyl Figure! This exclusive’s unique deco gives Steve Rogers a carved-wood appearance, but it actually is made of plastic. This realistic, specialized paint technique gives the Marvel super hero a carved-wood appearance. And just like real wood, the “grain” design varies on each figure so no two are identical!

The Captain America Wood Deco Variant Pop! Marvel Vinyl Figure stands 3.75” tall, features one point of articulation and comes packaged in a full color displayable window box. This retailer exclusive figure can be pre-ordered now at Entertainment Earth for $14.99 here.
Pin It! - Pin A Picture From TheBlotSays.com

Sunday, November 24, 2019

DCon 2019 Exclusive “Chasing Your Demons” Giclee Print by Thomas Han x Silent Stage Gallery

Designer Con 2019 Exclusive “Chasing Your Demons” Giclee Print by Thomas Han x Silent Stage Gallery

Silent Stage Gallery is releasing at Designer Con 2019 this awesome new giclee fine art print “Chasing Your Demons” by artist Thomas Han. The Blot is thrilled to see Han back in the art scene in a big way this year, with new paintings, prints and custom figures. I hope this mean we may see a new THan resin or vinyl figure in the near future as well! It measures 11”x14” and is limited to just 25 pieces. Each print comes signed and numbered by Thomas Han and includes a certificate of authenticity! It can be purchased at the Silent Stage DCon booth #2819 for just $40.
Pin It! - Pin A Picture From TheBlotSays.com

DCon 2019 Exclusive Piddy Paw Vinyl Figure by Horrible Adorables

Designer Con 2019 Exclusive Piddy Paw Vinyl Figure by Horrible Adorables

Meet the Designer Con 2019 Exclusive Piddy Paw, Horrible Adorables’ newest soft vinyl Familiar. Piddy Paw is a mystical glitter baby whose vinyl features a milky shimmering effect that is a must see in person! Plus, eeach Familiar comes with a starter pack of Horrible Adorables’ new game Ballyhoo. Collectors can purchase Piddy Paw and her Familiar friends at the Horrible Adorables DCon booth 1925 for just $45.

Designer Con 2019 Exclusive Piddy Paw Vinyl Figure by Horrible Adorables
Pin It! - Pin A Picture From TheBlotSays.com

DCon 2019 Exclusive PeeWee Saint Resin Figure by Sentrock

Designer Con 2019 Exclusive PeeWee Saint Resin Figure by Sentrock

Sentrock is at Designer Con 2019 this weekend, where he is debuting an all new figure – the PeeWee Saint resin figure! This miniature version of his Bird City Saint character is limited to just 15 pieces and this Designer Con 2019 Exclusive Red Edition can be purchased at DCon booth #718.
Pin It! - Pin A Picture From TheBlotSays.com

DCon 2019 Exclusive LA Bird City Saint Vinyl Figure by Sentrock

Designer Con 2019 Exclusive Bird City Saint Los Angeles Edition Vinyl Figure by Sentrock

Sentrock is at Designer Con 2019 this weekend, where he is releasing this beautiful new LA Edition of his Bird City Saint soft vinyl figure! The Blot’s a huge Los Angeles Lakers fan, so I totally need one of these LA Bird City Saint figures, which was cast in translucent purple and gold swirled vinyl. This 5.5” vinyl figure is limited to 50 pieces, and can be purchased at DCon booth #718.
Pin It! - Pin A Picture From TheBlotSays.com

DCon 2019 Exclusive Pizzatron Debut Edition Soft Vinyl Figure by UhOh Toys

Designer Con 2019 Exclusive Pizzatron Debut Edition Soft Vinyl Figure by Uhoh Toys

UhOh Toys is debuting its newest figure – Pizzatron – this weekend at Deisgner Con 2019. For it’s Debut Edition colorway, the figure has been cast in purple soft Japanese vinyl with silver, gold, red and blue sprays. To go with the pizza theme, each figure comes packaged in a custom pizza box! How rad is that!?! I love that his stomach is a coal burning oven and the smoke is escaping from his chef’s hat. This rad new figure can be purchased at the Creature Bazaar DCon booth #1349.
Pin It! - Pin A Picture From TheBlotSays.com

Saturday, November 23, 2019

DCon2019 Exclusive Cornelius Vinyl Figures by Alex Pardee, 3DRetro & FYE

Designer Con 2019 Exclusive Cornelius Vinyl Figures by Alex Pardee x 3DRetro x FYE

It turns out there are three different new colorways of Alex Pardee’s Cornelius vinyl figure available this weekend at Designer Con 2019! Alex has this patriotic new Bomb Pop Edition at his DCon booth #124, while the insanely goth Nightmare Mix with glowing eyes is exclusive to FYE’s DCon booth #2400. 3DRetro has also released this Christmas Edition at their booth #1905. Collect them all as they are all equally malicious as they are delicious!

Designer Con 2019 Exclusive Cornelius Vinyl Figures by Alex Pardee x 3DRetro x FYE

The henchman of the Candemons is the Halloween candy you hate that hates you back! This is the final 3 of 6 classic candy-coated vinyl collectible demons to crawl from your candy bowl. Produced by 3DRetro and sculpted by Greg Aronowitz, Cornelius stands 7” tall, sports that trademark Brightmares grin, and comes packaged in a full color window box.
Pin It! - Pin A Picture From TheBlotSays.com

DCon 2019 Exclusive Rhino Beetle Vinyl Figure by The Beast Is Back x Unbox Industries

Designer Con 2019 Exclusive Rhino Beetle Vinyl Figure by The Beast Is Back x Unbox Industries

The Beast Is Back (aka Chris Lee) is at Designer Con 2019 this weekend in Anaheim, CA where he will be debuting a new soft vinyl figure of his adorable Rhino Beetle! How freaking cute is this little guy!?! For DCon, The Beast Is Back has teamed up with Unbox Industries to release three Designer Con 2019 exclusive colorways of the figure: Peach Mist, Midnight Plum and Purple Soda.

The “Peach Mist” Rhino Beetle will be available at The Beast is Back DCon booth #2101, the “Midnight Plum” Rhino Beetle will only be available at the Unbox Industries DCon booth #1415, while the “Purple Soda” Rhino Beetle will be available at both booths. Each figure comes bagged with an illustrated header card, and will retail for around $50.

Chris gave a little background information on this exciting new figure (via his Instagram page): “I worked closely with the amazing team at Unbox Industries over the past 11 months to tweak the original resin version of the sculpt to work in vinyl. While small things changed across the board for technical reasons, the biggest change was the addition of a fully articulated head that just adds a ton of extra personality to the figure. Ever wished the original Rhino Beetle could do a cute head tilt? Well, you can do that now! The log base also includes little slots for the figure’s feet so it doesn't slide off.”
Pin It! - Pin A Picture From TheBlotSays.com

DCon 2019 Exclusive THE G.O.A.T. Chicago Red Edition Resin Figure by Tracy Tubera

Designer Con 2019 Exclusive THE G.O.A.T. Chicago Red Edition Resin Figure by Tracy Tubera

Tracy Tubera has revealed his newest original resin figure, The G.O.A.T.! Inspired by arguably the greatest basketball player (and sneaker spokesperson) of all time, Michael Jordan, The G.O.A.T. is a 10” tall, hand crafted full resin art sculpture with a glossy finish. This figure is based on Tubera’s previously released GOAT print. For it’s first colorway, The G.O.A.T. is being released in a Designer Con 2019 Exclusive Chicago Red Edition, which pays homage to Jordan’s Chicago Bulls.

Designer Con 2019 Exclusive THE G.O.A.T. Chicago Red Edition Resin Figure by Tracy Tubera

This amazing piece is limited to just 23 pieces and will retail for $225. During 2:15-3:15pm on Saturday, November 23rd, De Korner will be releasing a small batch of these figures at their DCon booth #400. The remaining pieces will be released online to give people who can’t make it out to Designer Con 2019 a chance to buy one.
Pin It! - Pin A Picture From TheBlotSays.com

Designer Con 2019 Official Screen Print by Tim Doyle

Designer Con 2019 Official Screen Print by Tim Doyle

Nakatomi is in Anaheim this weekend for Designer Con 2019, where they will be selling all kinds of amazing art. But what’s really cool about this year’s trip is that Nakatomi’s own Tim Doyle was asked by Designer Con to design an official art print for the show. How awesome is that!?!

The Designer Con 2019 Official Screen Print by Tim Doyle measures 18”x24” and is available in a show exclusive limited edition of only 100 signed and numbered pieces. Doyle will be present at the Nakatomi DCon booth #2516 all three days of the show.
Pin It! - Pin A Picture From TheBlotSays.com

Friday, November 22, 2019

DCon 2019 Exclusive Staggle Resin Figure by Chris Ryniak x Silent Stage Gallery

Designer Con 2019 Exclusive Staggle Resin Figure by Chris Ryniak x Silent Stage Gallery

Check out this awesome new resin figure from Chris Ryniak and Silent Stage Gallery! Staggle will be making his world debut exclusively at Designer Con 2019. This new figure stands a whopping 8” tall, and the Designer Con 2019 exclusive colorway is limited to just 25 pieces. Collectors can purchase it at the Silent Stage DCon booth #2819 for $250.
Pin It! - Pin A Picture From TheBlotSays.com

DCon 2019 Exclusive Jason Edmiston Tour T-Shirt by Rucking Fotten

Designer Con 2019 Exclusive Jason Edmiston Tour T-Shirt by Rucking Fotten

Check out this awesome Designer Con 2019 Jason Edmiston Tour T-Shirt by Rucking Fotten! On the front it features a haunting portrait of Jason Edmiston and on the back are all of the artist’s convention appearances for 2019: Horrorhound Weekend, Monsterpalooza, Texas Frightmare, San Diego Comic Con, New York Comic-Con, MondoCon and Designer Con. This rad exclusive is limited to just 50 pieces, and can be purchased at Jason Edmiston’s DCon booth for $30.
Pin It! - Pin A Picture From TheBlotSays.com

DCon 2019 Exclusive KUB Black & Grey Edition Vinyl Figure by Mike Fudge x UVD Toys

Designer Con 2019 Exclusive KUB Black & Grey Edition Vinyl Figure by Mike Fudge x UVD Toys

UVD Toys will be releasing the third colorway of Mike Fudge’s awesome KUB vinyl figure exclusively at Designer Con 2019 this weekend! The Designer Con 2019 Exclusive Black and Grey Edition KUB vinyl figure (yes they’re intentionally using the British spelling) stands 7” tall and will retail for $75 at the UVD Toys DCon booth #2300.
Pin It! - Pin A Picture From TheBlotSays.com

DCon 2019 Exclusive “Litha” Art Print by Kevin Tong

Designer Con 2019 Exclusive “Litha” Screen Print by Kevin Tong

Kevin Tong has unveiled a second Designer Con 2019 exclusive screen print, “Litha”! This design was originally part of an official poster for the Austin City Limits Music Festival 2019, but is now being released as an art print. As Kevin explained, “Litha refers to the midsummer festivals celebrated by pre Christian Europeans during the summer solstice.”

The Designer Con 2019 Exclusive “Litha” Art Print by Kevin Tong is a 36”x24” signed and numbered screen print with metallic inks on holographic foil paper. Collectors can purchase this limited edition print at the Kevin Tong Illustration DCon booth #2620.
Pin It! - Pin A Picture From TheBlotSays.com

DCon 2019 Exclusive Marbled PickleBaby Vinyl Figure by Leecifer

Designer Con 2019 Exclusive Marbled PickleBaby Vinyl Figure by Leecifer

After an insane break, Leecifer’s creepy hugging alien PickleBaby returns this weekend at Designer Con 2019!!! Thanks to Science Patrol for producing these beautiful marbled PickleBaby, which were cast in swirled pink and purple soft Japanese vinyl with hand painted eyes. Collectors can purchase this limited edition exclusive directly from Leecifer at his DCon booth #1413. This wild sofubi stands 8”, features multiple points of articulation, and comes bagged with a colorway specific header card.
Pin It! - Pin A Picture From TheBlotSays.com

DCon 2019 Exclusive Bodega Black Edition Wood Figure by kaNO x Knocks on Wood

Designer Con 2019 Exclusive Bodega Black Edition Wood Figure by kaNO x Knocks on Wood

Here’s some exciting news – kaNO is teaming up with Knocks on Wood to release a second colorway of his epic all wood Bodega figure! The Designer Con 2019 Exclusive Black Wood Bodega stands 6” tall and is limited to just 10 pieces. Collectors can purchase this awesome new figure at kaNO’s DCon booth #207.
Pin It! - Pin A Picture From TheBlotSays.com

Thursday, November 21, 2019

DCon 2019 Exclusive Animal Style (American Goldfinch) Fine Art Giclee Print by Jason Edmiston

Designer Con 2019 Exclusive Animal Style (American Goldfinch) Fine Art Giclee Print by Jason Edmiston

Jason Edmiston continues his brilliant Fast Food Bird series with the Designer Con 2019 Exclusive Animal Style: American Goldfinch Fine Art Giclee Print! Edmiston’s epic Whatabird (Eastern Bluebird) is finally getting the rival it deserves this weekend at DCon. This delicious new print measures 11”x14”, is limited to just 125 pieces and will retail for $40 at Edmiston’s DCon booth. He will also have the original painting of this print, the pencils of this print and so much more for sale! EWAF fans will not want to miss this convention.
Pin It! - Pin A Picture From TheBlotSays.com

DCon 2019 Exclusive Interstellar Jelly Fine Art Print by Tara McPherson

Designer Con 2019 Exclusive Interstellar Jelly Fine Art Print by Tara McPherson

Tara McPherson and The Cotton Candy Machine are in Anaheim this weekend for Designer Con 2019, where they will be releasing two beautiful editions of Tara’s newest print, Interstellar Jelly! As CCM explained, “Float between the stars, through time and space with Tara McPherson’s newest art print, Interstellar Jelly. The jellyfish floating serenely inside this explorer’s helmet, poised to inspire. This image was originally featured as Tara’s 2010 rock poster for Australian-American rock band, Liars. Now reimagined with new details and new color palettes.”

The Designer Con 2019 Exclusive Interstellar Jelly Fine Art Print by Tara McPherson will be available in a Pink Edition and a Black Edition. Each version is limited to 100 signed and numbered pieces on Velvet Cotton Rag paper. These prints will retail for $80 each exclusively at The Cotton Candy Machine DCon booth #2000.
Pin It! - Pin A Picture From TheBlotSays.com

DCon 2019 Exclusive Who Framed Roger Rabbit Screen Print by Rockin’ Jelly Bean x Disney x Cyclops Print Works

Designer Con 2019 Exclusive Who Framed Roger Rabbit Screen Print by Rockin’ Jelly Bean x Disney x Cyclops Print Works

Cyclops Print Works has unveiled its third and final Designer Con 2019 Disney exclusive – it’s this bad ass Who Framed Roger Rabbit Screen Print by Rockin’ Jelly Bean! Man, RJB did an amazing job illustrating the cult-classic Who Framed Roger Rabbit in his signature retro-styling.

Who Framed Roger Rabbit by Rockin’ Jelly Bean is an 18”x36” hand numbered 12 color screen print. The Regular Edition was printed on French Speckle Tone paper, is limited to 240 pieces, and will retail for $90. Cyclops Print Works is also releasing a special Variant printed on an imported pearlescent Koshiji paper that is limited to 40 pieces. Both versions can be purchased at the Cyclops Print Works DCon booth #2220.
Pin It! - Pin A Picture From TheBlotSays.com

DCon 2019 Exclusive “Lepidoptera 3” Giclee Print by N.C. Winters

Designer Con 2019 Exclusive “Lepidoptera 3” Giclee Print by N.C. Winters

N.C. Winters has a lot of cool releasing lined up for Designer Con 2019 this weekend, including this beautiful fine art print, “Lepidoptera 3”! This is the third print in Winters’ Lepidoptera series of weird-ass moths, and according to N.C. this is his favorite one yet! This 8”x10” signed and numbered print is limited to just 150 pieces and will retail for $35 exclusively at N.C. Winters’ DCon booth #2616. Winters will also have a hand embellished version of Lepidoptera 1-3 for sale for $100 each with a limit of one per person.
Pin It! - Pin A Picture From TheBlotSays.com

DCon 2019 Exclusive Hello Kitty Feeling Blue Edition Vinyl Figure by Candie Bolton x BAIT x Kidrobot

Designer Con 2019 Exclusive Hello Kitty Feeling Blue Edition Vinyl Figure by Candie Bolton x BAIT x Kidrobot

The Blot cannot believe just how many different colorways Kidrobot has released of this Hello Kitty 9” Vinyl Art Figure by Candie Bolton. Turns out there’s not one but two Designer Con 2019 Exclusive Hello Kitty vinyl figures. Along with the KR DCon exclusive, BAIT is also releasing its very own Designer Con exclusive colorway – the Feeling Blue Edition Hello Kitty figure. Collectors can purchase it at the BAIT DCon booth #1205.

Candie Bolton’s unique take on Hello Kitty represents the emotional and uncertain time of transition into adulthood. With this design, Candie expresses the idea that you don’t need to let go of childhood to be an adult. It expresses the revelation that memories don’t have to be forgotten in order to grow. Hello Kitty has a perpetual childlike innocence to her, but what happens when Hello Kitty grows up? Candie’s imagines Hello Kitty going through these same iconic adolescent events and, despite her uncertainty, never letting go of the magic that makes her Hello Kitty.
Pin It! - Pin A Picture From TheBlotSays.com

DCon 2019 Exclusive Flyboy 400% Be@rbrick Vinyl Figure by Hebru Brantley x BAIT x Medicom Toy

Designer Con 2019 Exclusive Flyboy 400% Be@rbrick Vinyl Figure by Hebru Brantley x BAIT x Medicom Toy

BAIT will be releasing the long awaited Flyboy 400% Be@rbrick Vinyl Figure by Hebru Brantley and Medicom Toy exclusively at Designer Con 2019 this weekend! The previously released Flyboy 100% Be@rbrick sold out almost at New York Comic Con 2019, so don’t expect this figure to last long at Designer Con. Collectors can purchase it at the BAIT DCon booth #1205.
Pin It! - Pin A Picture From TheBlotSays.com

DCon 2019 Exclusive “Bag of Bones” Mini Panda King 3 Red & Smoke Resin Figures by Woes Martin x Scott Wilkowski x Silent Stage Gallery

Designer Con 2019 Exclusive “Bag of Bones” Mini Panda King 3 Red & Smoke Resin Figures by Woes Martin x Scott Wilkowski x Silent Stage Gallery

The “Bag of Bones” Mini Panda King 3 resin figure by Woes Martin and Scott Wilkowski returns with two Designer Con 2019 exclusive colorways! Don’t these red and smoke colored Mini PK3 resin figures look amazing? Love the panda skull Wilkowski created for this release. Collectors can purchase both Bag of Bones PK3 mini figures at the Silent Stage Gallery DCon booth #2819.
Pin It! - Pin A Picture From TheBlotSays.com

DCon 2019 Exclusive GoGORILLA Metallic Edition Vinyl Figure by James Groman x 3DRetro

Designer Con 2019 Exclusive GoGORILLA Metallic Edition Vinyl Figure by James Groman x 3DRetro

3DRetro will be releasing a new colorway of James Groman’s GoGORILLA vinyl figure exclusively at Designer Con 2019 this weekend in Anaheim. This Metallic Edition GoGORILLA features a gold and silver color scheme and is limited to just 100 pieces. Collectors can purchase it at the 3DRetro DCon booth #1905 for $80. This vinyl figure stands 8” tall and features 3 points of articulation.
Pin It! - Pin A Picture From TheBlotSays.com

DCon 2019 Exclusive Coke Head Vinyl Figure by Bob Dob x 3DRetro

Designer Con 2019 Exclusive Coke Head Vinyl Figure by Bob Dob x 3DRetro

3DRetro will kick off Bob Dob’s new line of HEADS vinyl figures with the Designer Con 2019 Exclusive Coke Head! This limited edition vinyl figure will be available for $65 at the 3DRetro DCon booth #1905. The Blot loves Bob Dob’s art and I can’t wait to see what other characters will be included in this series. I assume Pot Head is a guaranteed edition?
Pin It! - Pin A Picture From TheBlotSays.com

“Human Terror” Fine Art Print by Tristan Eaton

“Human Terror” Fine Art Print by Tristan Eaton

Tristan Eaton will be releasing this awesome “Human Terror” Fine Art Print exclusively in person at his studio shop in Highland Park on Saturday, November 23rd, from 12-8pm, and on Sunday, November 24th, from 12-6pm. It is located at 5012 York Blvd (Between The York Bar & Highland Cafe).

“Human Terror” by Tristan Eaton is limited to just 100 pieces and will retail for $300 (originally listed at $500 at a gallery that pulled the release). Each print comes wrapped in tissue paper and sandwiched in a cardboard sleeve. A portion of the proceeds of this print will benefit young artists in LA.
Pin It! - Pin A Picture From TheBlotSays.com

Wednesday, November 20, 2019

DCon 2019 Exclusive Panda King 4 Smoke Edition Resin Figure by Woes Martin x Silent Stage Gallery

Designer Con 2019 Exclusive Panda King 4 Smoke Edition Resin Figure by Woes Martin x Silent Stage Gallery

Check out the magnificent Panda King 4 by Woes Martin, which will be making its world debut at Designer Con 2019 this weekend. The Designer Con 2019 Exclusive Smokie PK4 stands 9” tall and was cast in clear high impact resin with streams of black mist going through his body while chilling with his Golden Eagle. Limited to just 15 pieces, collectors can purchase Smokie at the Silent Stage Gallery DCon booth #2819.
Pin It! - Pin A Picture From TheBlotSays.com

Cometdebris’ Designer Con 2019 Exclusives

Cometdebris’ Designer Con 2019 Exclusives

Koji Harmon of Cometdebris is heading to California this weekend to attend DCon 2019, where he’ll be releasing some awesome sofubi exclusives and customs. There will be at least five different Cometdebris Designer Con 2019 exclusives dropping at the convention, as well as a tote, t-shirt and Lucky Bags including 1 or 2 custom figures.

Cometdebris’ Designer Con 2019 Exclusives

Cometdebris’ Designer Con 2019 exclusives include clear with silver glitter Kappaborg ($35), marbled glow and pink Tofu Kid (LE5, $35), pink glow Oni Kid ($35), chrome Kid-X ($50), and Kappa Shonen ($60). All of these fantastic exclusive figures cast in soft Japanese vinyl can be purchased at the Cometdebris DCon booth #2828.

Cometdebris’ Designer Con 2019 Exclusives

Cometdebris’ Designer Con 2019 Exclusives

Cometdebris’ Designer Con 2019 Exclusives

Cometdebris’ Designer Con 2019 Exclusives

Cometdebris’ Designer Con 2019 Exclusives

Cometdebris’ Designer Con 2019 Exclusives
Pin It! - Pin A Picture From TheBlotSays.com